At Clenergize, we don’t just design intelligent Building Management Systems (BMS) — we make them work exactly as intended. Our Programming, Integration & Commissioning services transform static designs into dynamic, fully operational platforms that deliver real-time intelligence, control, and energy optimization for buildings of every type.
Whether you’re building a smart hotel, data center, commercial tower, or hospital, our integration and commissioning team ensures that your BMS system works as a single, intelligent unit across HVAC, lighting, energy metering, guest room automation, and more.
We are your partner for precision programming, seamless protocol integration, and rigorous field testing.
Protocol-Based System Programming
Every building is different, and so is every automation strategy. That’s why our KNX certified professionals and protocol engineers customize your BMS logic based on actual project requirements and standards.
- Programming support for KNX, BACnet, Modbus, and DALI systems
- Custom sequence development for lighting, HVAC, GRMS, metering, and shading
- Parameter configuration and logic tuning for energy-saving automation
- Upload and backup of logic files and addressing schemes
- Off-site programming and scenario simulations to speed up on-site commissioning
From presence detection and daylight harvesting to constant dimming and tunable light control, we tailor programming to maximize occupant comfort and building efficiency.
Multi-System Integration & Cross-Platform Interoperability
Integration is where automation becomes truly smart. Our integration engineers connect all key building systems into one seamless control environment — using open protocols and vendor-neutral platforms.
- Integration of HVAC automation and control systems with centralized BMS
- Cross-platform integration with guest room management systems (GRMS)
- Interfacing with lighting control solutions using DALI lighting control
- BACnet/Modbus integration for energy meters, third-party sensors, and panels
- KNX and DALI integration for smart lighting control and room-level automation
- Centralized management via BMS/SCADA for real-time performance visibility
Our integration mapping ensures each system communicates reliably and responds in sync with others — forming a unified, intelligent ecosystem.
System Architecture Mapping
We document the full integration architecture to ensure logical consistency and long-term maintainability.
- Mapping of communication loops and protocol addressing
- Creation of device schedules and communication hierarchies
- Data point allocation for SCADA and BMS platforms
- Network diagrams for KNX, DALI, and Modbus loops
- Time synchronization strategy across devices and systems
Whether you’re building smart solutions for hotels, hospitals, retail stores, or mixed-use developments, we make sure your BMS is built on a resilient, scalable backbone.
Scenario Configuration & Use Case Design
We simulate real-world use cases to align automation logic with daily operations and energy management goals.
- Scheduler setup for lighting and HVAC zoning based on occupancy
- Scene configuration for guest rooms, meeting spaces, or retail zones
- Override scenarios for manual control and safety integration
- Alarm logic for faults, device failures, and emergency shutdowns
- Real-time logic testing and simulation of operational conditions
Our goal is to ensure that your smart building solutions respond intelligently, not just automatically.
Testing, Commissioning & Functional Validation
We ensure that every device works, every logic performs, and every system responds before your project goes live.
- Field testing of all BMS-connected devices and actuators
- Point-to-point validation of I/O wiring and communication signals
- Loop tuning for HVAC valves, dampers, and variable speed drives
- Simulation of alarms and fail-safe conditions
- Verification of control logic and override behavior
- Documentation of commissioning checklists and test reports
We apply strict performance standards across every facility type — from showrooms and staff accommodations to large-scale residential compounds and high-rise commercial buildings.
Interdisciplinary Coordination During Commissioning
Our engineers coordinate directly with MEP contractors, integrators, and OEM vendors to resolve on-site challenges quickly.
- Real-time troubleshooting and programming adjustments
- On-the-spot configuration of scenes, alarms, and automation schedules
- Gateway setup and addressing corrections during testing
- System performance tuning for specific environmental conditions
- Coordination of final sign-off with clients, consultants, and FM teams
By working collaboratively on-site, we minimize delays and maximize handover readiness.
As-Built Logic & Documentation
We finalize all programming and configuration documentation for seamless handover and long-term maintenance.
- Final upload of logic files with backup on cloud and local servers
- As-built addressing maps and functional descriptions
- Logic architecture mapping for KNX, DALI, BACnet, and Modbus networks
- Scene, schedule, and override logic documentation
- System performance test results and validation logs
This documentation becomes the blueprint for your FM teams and AMC partners to maintain your system with confidence.
BMS Commissioning for All Building Types
We commission automation systems for a wide range of buildings and sectors
- Smart building solutions for hospitals and medical facilities
- Energy management systems for hotels and resorts
- KNX automation for villas and private homes
- Smart lighting control for retail chains and showrooms
- BMS integration for educational institutions and corporate campuses
- Smart sensors and HVAC control systems for data centers
No matter the use case, we deliver commissioning with precision, reliability, and compliance.
